TurpanIntelligent coating robot RH-TF01M3
Category:
Product Description
Coating speed: 6 m/min
Apply first gear in 20~30 minutes
On-site construction drawing of intelligent coating robot
Real shot:
 |  |
 |  |
Brief Introduction to Insulation Wire Coating Robot
1. Ultra-light: RH-TF01M2
The coating robot can carry out live working for insulation transformation of overhead bare conductors of 10kV/35kV power grid distribution lines.
2. Double barrels, high working efficiency, high speed, high quality coating, even thickness without eccentricity.
3. Without the help of insulating aerial device, the coating robot uses the ground ejection gun(or throwing drone) to throw the traction rope over the line,then the hook will be hung on the wire and realize “automatic on-line” with one button.
4. The diameter of the wire is measured automatically when the robot touches the wire.
5.Push one button to start “automatic coating”, the insulating glue evenly coated on the surface of the bare wire, and the robot automatically stops when it reaches the end of the line to complete the offline process.
6. The robot will stop automatically when it lands on the ground, and the hook falls off automatically when the sling is slack.
7.The robot can operate without power failure. After the insulating adhesive is cured, the insulation transformation of bare wires is completed.
8. Adopt multi-sensor fusion technology to realize intelligent operation of equipment. Adopt MIMO wireless communication which can simultaneously transmit multi-channel video signals,control instructions and equipment status parameters to monitor machine status in real time.
Parameters:
Model structure: Double barrels (d120)/ Double winch/ Double arm wheels on the same side/ Double-wheel compression
Function configuration: wire diameter measurement, arc-control device, obstacle ranging, blocking shutdown, lifting balance, multi-speed regulation, video channel 3, voice prompt,
Applicable wire specification: LGJ50/30 ~ LGJ250/40 (wire diameter: 11.6 ~ 22.4)
Empty weight: ≤ 28 Kg
Maximum loading volume: 8L(4 L × 2)
Walking speed: ≤ 10 m/min
Climbing angle: ≤ 30 °
Endurance: ≥ 4 H
Equipment size: 1040(L)× 335(W)× 360(H)